This is a very simple chaser tutorial
A chaser is a positioned scroll or background with different start positionsI shall attempt (VBG) to write this on the above chaser
A chaser is a positioned scroll or background with different start positionsI shall attempt (VBG) to write this on the above chaser
Let the containers stay nested unless I tell you to pull them over to the left
The gold glitter I've used is 100x100this works best with the example that we are doing here
Also be very sure to go over the numbers and positions as one little mistake and it won't work properly lol
Also be very sure to go over the numbers and positions as one little mistake and it won't work properly lol
So double check everything and try not to get distracted while you are building your ssc1
2.Insert a background, mine is black
3.Insert a positioned container, 205 x 205 and 40 from the top, and horizontal centred
(This Container holds all the subcontainers for the scrolls So it copied and pasted much easier
3.Insert a positioned container, 205 x 205 and 40 from the top, and horizontal centred
(This Container holds all the subcontainers for the scrolls So it copied and pasted much easier
4. insert a background, mine is the gold glitter, scroll as you want
5.Insert positioned container, all edges set to 3, insert background, set colour, mine is black This sets the frame around the chaser Insert positioned container, set specified sizes to 100, and centre in both horizontal and vertical boxes
6. Insert positioned container (note the position on this one, as the following containers need to be pulled over level to this one) Set position and width to left 0 size 100; Position and height top 0 size 2
7. Insert background, mine is gold glitter, scrolling right at 150 pixels per second, 1 pixel per move, fast scroll. Horizontal spacing 300, horizontal start 0
8; Insert positioned container, pull it over so it is level with the container above it; Position and width right 0, size 2, position and top 0 size 100.
5.Insert positioned container, all edges set to 3, insert background, set colour, mine is black This sets the frame around the chaser Insert positioned container, set specified sizes to 100, and centre in both horizontal and vertical boxes
6. Insert positioned container (note the position on this one, as the following containers need to be pulled over level to this one) Set position and width to left 0 size 100; Position and height top 0 size 2
7. Insert background, mine is gold glitter, scrolling right at 150 pixels per second, 1 pixel per move, fast scroll. Horizontal spacing 300, horizontal start 0
8; Insert positioned container, pull it over so it is level with the container above it; Position and width right 0, size 2, position and top 0 size 100.
9 Insert background, gold glitter, scrolling down at 150 pixels per second, 1 pixel per move, fast scroll Vertical spacing 300, vertical start -100
10. Insert positioned container, pull it over so it is level with the container above it Position and width right 0, size 100Position and height bottom 0, size 2
11.Insert background, gold glitter, scrolling left at 150 pixels per second, 1 pixel per move, fast scroll Horizontal spacing 300, horizontal start 200
12 Insert positioned container, pull it over so it is level with the one above it position and width ;left 0, size 2 Position and Height bottom 0 size 100
13 Insert background gold glitter, scrolling up at 150 pixels per second, 1 pixel per move, fast scroll. Vertical spacing 300, vertical start 300
14 Insert Positioned Image Pull it out to the left slightly so it sits just outside the container above it Leave it centred .The height and width of this image shouldn't be more than 97 pixels high and wide, so you will need to resize to these dimensions or smaller
15. Now comes the easy part, go to the 1st container, highlight it, copy it . Then highlight the last positioned image and paste in the copied container remember to pull it RIGHT over to the left
10. Insert positioned container, pull it over so it is level with the container above it Position and width right 0, size 100Position and height bottom 0, size 2
11.Insert background, gold glitter, scrolling left at 150 pixels per second, 1 pixel per move, fast scroll Horizontal spacing 300, horizontal start 200
12 Insert positioned container, pull it over so it is level with the one above it position and width ;left 0, size 2 Position and Height bottom 0 size 100
13 Insert background gold glitter, scrolling up at 150 pixels per second, 1 pixel per move, fast scroll. Vertical spacing 300, vertical start 300
14 Insert Positioned Image Pull it out to the left slightly so it sits just outside the container above it Leave it centred .The height and width of this image shouldn't be more than 97 pixels high and wide, so you will need to resize to these dimensions or smaller
15. Now comes the easy part, go to the 1st container, highlight it, copy it . Then highlight the last positioned image and paste in the copied container remember to pull it RIGHT over to the left
16. Now to change the position of the main container change the position and width to centre 250
17. Make sure that the last ;positioned image ;is highlighted and paste in again Make sure you pull it right over to the left
18 Change the position of the main container to centre
19 Now insert your message area and PULL IT OVER TO THE LEFT Set the margins to left and right 90, top 280 and bottom 30
20 Insert sound ticker and loading message And you are done
Hope you all have fun with this one
18 Change the position of the main container to centre
19 Now insert your message area and PULL IT OVER TO THE LEFT Set the margins to left and right 90, top 280 and bottom 30
20 Insert sound ticker and loading message And you are done
Hope you all have fun with this one
scrippy help a shell guest tutorial 2002